![]() |
![]() |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Jeep Wrangler YJ 1987-1995 Emissions Parts
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Browse through our selection of Jeep
Wrangler YJ parts.
If you need a part but don't see it here, e-mail us at parts@teamwrangler.com and
we'll do our best to locate it for you. Or if you prefer, call us at (262)
658-2268. Order safely and securely: Clicking on the purchase button for any of the parts below will take you to our secure online ordering system. All prices below are quoted in U.S. dollars. Shipping charges are additional. 30-day warranty on parts: Parts must be returned in original package and are subject to a 20% restocking fee. No returns on electrical items. Customer must pay for return shipping. |
||||
|
|
Click here for larger image
|
|
Emission Timer Relay Wrangler 1988-1990 This is a Factory Original part. This is the emission timer box relay that will trigger the emission light to come on the dash at certain miles. They need to be replaced to turn off the light. This will fit all Jeep Wranglers from 1988-1990. |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: EXHAUST MANIFOLD & GASKET 2.5 LITER WRANGLER 1991-2000 This OMIX Brand Exhaust Manifold Comes Complete With An Exhaust Gasket For A Secure Seal When Installing This Brand New Exhaust Manifold. This Exhaust Manifold & Gasket Will Fit All Jeep Wranglers From 1991-2000 With The 2.5 Liter Engine. If Your Exhaust Manifold Is Cracked Or Has Carbon From A Undetectable Crack But You Hear Ticking Noise From The Engine From The Exhaust Manifold-Then You May Need To Replace IT. If You Manifold Is Loud & Cracked-You Will Need To REPLACE YOUR EXHAUST MANIFOLD AS SOON AS POSSIBLE ESPECIALLY FOR PASSING EMISSIONS. GET YOURS NOW. OUR PIPE IS BETTER THAN ORIGINAL & TONS CHEAPER. OMIX PART#17622.04 OEM REPLACEMENT PART#53008660K |
|
|
|
||||
|
|
|
|
Featured Item: Front & Rear Valve Cover Vent Set Wrangler 4.0 Liter 1991-1993 These Valve Cover Vents Will Only Be Sold As A Pair. They Are Factory Original Parts & They Help Ventilate The Engine As Well As Aiding In Emissions. They Will Fit All Jeep Wranglers From 1991-1993 With The 4.0 Liter Engine. They Easily Install In Minutes & Should Be Changed Every 30,000 Miles. Have Your Vents Ever Been Changed? For The Benefit Of Your Engine & The Low Cost Of The Parts-What Are You Waiting For. |
|
|
|
||||
|
|
|
|
Idler Pulley Bushing Wrangler 1994-2004 This is a factory original part. This is an OEM idler pulley bushing that fits inside the pulley.This will fit Jeep Wranglers from 1994-2004. |
|
|
|
||||
|
|
|
|
Featured Item: Oxygen Sensor Wrangler 4.2 Liter 1987-1990 This is the Oxygen Sensor that goes into the exhaust manifold of the 4.2 liter engine. This Oxygen Sensor will fit all Jeep Wranglers from 1987-1990 with the 4.2 Liter engine. If your oxygen sensor is causing your engine light to come on for any reason-most likely your Jeep will fail emissions testings for either the engine running too rich which will waste expensive gas or running too lean which will make your engine run very rough to the point where it will almost die out and will cause you mileage to be very poor. If your oxygen sensor is bad--these are very good reasons to replace them right away. This sensor should be replaced every 90,000 miles. If you have not changed your sensor and you have exceeded this mileage--you may want to replace this sensor before it goes bad as it may not be working as well as it should. This is easy to get to on the engine for installation. |
|
|
|
||||
|
|
|
|
Rear Valve Cover Vent Wrangler 4.0 Liter 1994-2003 This is a Factory Original Part. This OEM Vent is on the rear of the valve cover where the breather tubes connect and will fit all Jeep Wranglers from 1994-2003 with the 4.0 liter engine. |
|
|
|
||||
|
|
Click here for larger image
|
|
Featured Item: RUGGED RIDGE THROTTLE BODY SPACER JEEP WRANGLER 4.0 LITER 1991-2006 & 2.5 LITER 1991-2002 The Rugged Ridge Throttle Body Spacer raises the throttle body 1 in. above the intake manifold. The lift helps optimize power and performance by drawing in colder denser air. The large bore design allows your system to inhale a larger volume of air producing more horsepower and torque. It features solid aluminum construction with a slick anodized finish, and is a bolt on performance adder for both 4.0L and 2.5L engines. RUGGED RIDGE PART #17755.01 |
|
|
|
||||
|
|
|
|
Valve Cover Grommet Set Wrangler 4.0 Liter 1994-2004 These are Factory Original Parts. These are OEM valve cover grommets. They will fit all Jeep Wranglers with the 4.0 liter engine from 1994-2004.They will come as a pair. |
|
|
|
||||